Dazza9t9

iTrader: (2)

Hey all,

I am wondering if anyone on here can help me. I am looking for someone or some where that can make a custom carbon fibre gear surround.

My car has a shocking stainless steel one that the previous owner put on.

here it is




Sorry for the poor pic, but it is the bright part.

Can anyone on here make something simular but in carbon or can anyone point me in the direction of some where that can.

Thanks all

scoobiesteve103

im thinking of doing my own carbon bits,i dont look that hard 2 do.have a look at this link and watch the vid.hope this helps
http://cgi.ebay.co.uk/Carbon-Fibre-F...item3cb5668aef

The Zohan

http://www.6gc.net/howto/wrap_parts_with_carbon_fiber for the authentic look, a bot of work but looks great

or buy the self adhesive stuff http://www.demon-tweeks.co.uk/Produc...ign=Motorsport seem to remember hearing the 3m is the best type

Dazza9t9

iTrader: (2)

I think a flat bit or carbon will do it, I am not really looking to wrap what I already have.

How easy is it to cut and drill holes in carbon?

leecalcars

iTrader: (37)

Got a link fir you as I'm after a piece for dash il dig it out

The Zohan

small sharp HSsteel drill bit to pilot it then larger bit to size required. tape a cross over where you are drilling with masking tape to give a rougher surface and let the drill bite. Do not press too hard.

Dazza9t9

iTrader: (2)

Thank you, how about cutting the sheet? And shaping it?