thermostat housing nightmare
#1
thermostat housing nightmare
struggling to change my stat, as cant get the housing off, its a struggle to get the 10mm bolts out cuz not much room to play with. any ideas please, cheers
#3
Only way i found wa to remove the Radiator.
easy job, remove top hose, bottom hose already off (as your doing the housing/stat etc)
2 clamps on the slam panel hold the rad on, remove these, liftout, then,undo 1 of the hosuing bolts from underneath,the other from standing above the car
at least you have a stat to replace the old one with, i removed the old stat,ordered the new one (car not used everyday,i use a m/bike) still awaiting 10 days later caus of the post delay grrr
easy job, remove top hose, bottom hose already off (as your doing the housing/stat etc)
2 clamps on the slam panel hold the rad on, remove these, liftout, then,undo 1 of the hosuing bolts from underneath,the other from standing above the car
at least you have a stat to replace the old one with, i removed the old stat,ordered the new one (car not used everyday,i use a m/bike) still awaiting 10 days later caus of the post delay grrr
#5
Scooby Regular
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
easy enough to do with a decent socket set, only thing to be concerned about is sometimes the bolts will actually shear off - not good.
No need to remove the rad, thats overkill, just remove the bottom hose
No need to remove the rad, thats overkill, just remove the bottom hose
Thread
Thread Starter
Forum
Replies
Last Post