RE54

iTrader: (6)

ok, so im looking to get more power in my 54 STI type UK

car has the following...

up pipe
full decat exhaust
blitz air filter
remap by duncan

anyway, iv been advised on the following parts, to get plenty more power from my car.

FMIC (ordered)
cold air intake (ordered)
a decent turbo
uprated injectors
manifold/headers
3 port solinoid

what else am i going to need? and which brands or places should i be getting remain bits on my list.

thanks, rez

frayz

iTrader: (7)

Some feedback for you but you need to be specific on how much more power youre looking for.

JP4

iTrader: (12)

As Frayz says above - poss aftermarket ECU consideration if you're not already on one! Give Alyn @ AS Performance a call and he should be able to assist with parts.

RE54

iTrader: (6)

Was hoping for 400-450bhp

I thought a stock ecu would be ok and could mapped with these parts fine...?

stevebt

iTrader: (8)

Cold air intake doesn't work as well on newage cars as it does on older cars as I have been therre done that

frayz

iTrader: (7)

2nd the recomendation to give Alyn a call at AS Performance. You'll be hard pressed to find better customer service anywhere.

scatty

iTrader: (1)

i think with a decent turbo you will get there or there abouts.....

is it a full 3 inch exhaust system???

jura11

iTrader: (7)

Hi Rez

FMIC: Harvey selling the Hybrid,which are best for bang and highly used by people here and proven by many people(or if you want something different you may consider APS or Perrin)
K&N RCM big cone will be more effective for you like CAIK
Decent turbo:MD V series or GT30 are good turbo,which make around 400-450bhp
650cc with parallel mode will be fine for 400-450BHP(or if you are source 800cc,i think FB Tunning selling these for reasonable money)
About the headers,probably you can contact Harvey and his recommendation are well known or contact few mappers here which will help you.But biggest recommendation don't go for cheap ebay headers(Japspeed or others)
3 port solenoid selling like FB tunning or Slowboy Racing
You may consider new ECU,but this will confirm someone from mappers.
And at last you may consider better brakes like AP 6 pots.
But at first i will recommend get health check of your car,if will take this power.
And after this just remap form some mappers here,choice is yours.


Jura

weazel litchfield type

iTrader: (2)

I had mine done at scoobyclinic about a year ago now, runnig 440bhp and the sc46 billet is a pukka turbo for you needs

Moley

iTrader: (9)

A MD321T turbo would be my choice

l1verp00l

speak to roger clark about the turbo n things. what he dont know aint worth knowing

Moley

iTrader: (9)

.... although you might want to ask for Olly or Matt, you won't get hold of Roger

53

iTrader: (41)

was thinking the same scrolling down

jh1

you might want a new clutch for that power lol

l1verp00l

true that moley!