Cannon Fodder

iTrader: (100)

I have just bought an APS FMIC for fitment to my Spec C Blobeye, and now some other thoughts have come to mind...

I would like to remove the intake scoop and intercooler tray and replace with a carbon fibre reverse scoop or similar, does anyone have a recommendation and a photo or two of one in place.

The 12 litre intercooler spray bottle in the boot will now be useless, but I can now use it for another purpose such a water mist (aquamist perhaps) spray into the inlet manifold to aid in cooling and combustion, can anyone recommend a suitable water injection kit or would I be better off not bothering and just remove the water resevoir etc.

My eventual power aim is around 420-450bhp but this will be mainly achieved by the addition of a new twin scroll turbo probably one of the SC billet or Litchfield billet turbos in the new year.

jura11

iTrader: (7)

Hi matey "banny sti" selling the Aquamist 2D Water injection kit https://www.scoobynet.com/private-fo...-kit-tank.html
And here is few photso of reverse scoop/delete

stevie1982

iTrader: (16)

Rcm for the reverse scoop but it won't be cheap and speak with bob Ralwe regarding the aquamist as he had it fitted to his sti that I bought off him so I am sure he can recommend you the right parts you will need

eggy790

iTrader: (20)

banny has an aquamist kit which may be of use to you

as for scoop.. this reverse scoop looks mint!

https://www.scoobynet.com/trader-ann...ml#post9704015

Cannon Fodder

iTrader: (100)

That is the type of reverse scoop I've been looking at, plus I believe Kakumei also make a slightly different version of this as well.

To be honest I've seen the kit that Banny has for sale and that is an option, but I'd only be interested in bits of it.

scatty

iTrader: (1)

http://www.rogerclarkmotorsport.co.u...?productID=225

thats what ive had mi eye on......

Cannon Fodder

iTrader: (100)

I was hoping for a reverse scoop a little bit more price friendly than the RCM type, but they are very good quality so it is an option.

I'm just about to fire an e-mail off to Bob as I have to get a booking confirmed with the mods listed, I was due to go up to see him for a map tweak shortly, looks like a good time to get it all done at the same time.

Cannon Fodder

iTrader: (100)

Once I contacted Bob Rawle I'll have a list of what I need to re-use my existing 12L resevoir, I'll get in touch with Banny afterwards.

The reverse scoop looks good but only for Bugeye and Hawkeye at present and I was looking for a carbon fibre version preferably.

Cannon Fodder

iTrader: (100)

I didn't realise that they were that price, that's cheaper than I had thought, looks like RCM are an option after all.

Midlife......

iTrader: (2)

I've got an APS FMIC and a Spec C 12 litre tank putting 50/50 meth and water injection mapped by Bob Rawle...............but I've kept the scoop

Just IMHO but it doesn't look like an impreza without one



Shaun

jura11

iTrader: (7)

ABW here selling/or have to selling the reverse scoop for fair price(same reverse scoop have Duncan@ RaceDynamix on time Attack car),just contact the ABW

B0DSKI

iTrader: (17)

Not currently made for a Blobeye, but will be soon

Cannon Fodder

iTrader: (100)

I'm not really a big fan of the Blobeye STi scoop, so I'll be quite happy to see a reverse scoop in place helping to draw the hot air from the engine bay.

I'm really looking for a carbon fibre version, I know the Kakumei stuff is good qaulity and well priced as I have one of their carbon fibre S204 spoilers fitted.

jura11

iTrader: (7)

Hi there look for Chargespeed(these are carbon)

TimH

iTrader: (11)

Chargespeed carbon fibre one on mine, also with APS FMIC

Cannon Fodder

iTrader: (100)

Very nice , what was the fitment like? I would hope for a perfect fit with no minor trimming necessary.

TimH

iTrader: (11)

The reverse scoop bolted straight on with no alterations necessary. FYI it's fibreglass with carbon on the top, rather than "pure" carbon.

The APS needs a reasonable amount of the bumper cut away behind, but they supply an excellent template.

The only obvious bit of untidyness is where the grey plastic strip used to be along the top edge of the void below the number plate. There're now two rectangular holes at each side where it used to run behind the bumper, if you see what I mean.

You could leave it on I think, but airflow might be a bit poorer

TimH

iTrader: (11)

This is what I mean:

bigarf

iTrader: (67)

rcm reverse scoop + APS front mount.

thinking of changing the front end to hawkeye so the reverse scoop will be up for sale if i do.

B0DSKI

iTrader: (17)

I'll have it Arf if you sell it M8

Cannon Fodder

iTrader: (100)

Well there goes my Zunsport lower grille , having looked online at the fitting instructions for the APS FMIC I'm surprised at how much modification is required especially as they say that no really major work is required.

I see what you mean about having to remove that section, shame really as that section on my bumper is colour coded.

Cannon Fodder

iTrader: (100)

The RCM reverse scoop does look good.

Cannon Fodder

iTrader: (100)

I'm seriously leaning towards the Kakumei reverse bonnet scoop, as per the link below - what do you think?

I know the quality is good and I like the style.

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT

jura11

iTrader: (7)

Hi matey look at these reverse scoop from carbon(Seibon is maker no.1 for carbon)
http://j-w-racing.co.uk/section.php/..._bonnet_scoops

Cannon Fodder

iTrader: (100)

Very nice, I'm even more confused now.

Thanks for the link.

jura11

iTrader: (7)

With Seibon you are never go wrong....

Terminator X

iTrader: (7)

That mesh in lieu of scoop looks shocking

TX.

Cannon Fodder

iTrader: (100)

Which one TX?

Terminator X

iTrader: (7)

From 2nd post:

http://pcisusa.com/WRX/Scoop-delete-front.jpg

TX.

Jamie Bird

iTrader: (2)

I helped my friend fit his Seibon Hawkeye carbon bonnet the other day. The fit was very poor for £600. The hinge and catch bolt holes were the wrong size, the holes for the washer jet tube fixings were missing, the holes for the washer jets themselves were too small, the holes for the underscoop ducting thing didnt line up and some of the holes for the heatshield were missing !
Does look pretty cool now its on though.
Jay