Does anyone run a Agency Power Hard tubo inlet?
anyone had any problems, any tips for installing it? Advice to not to go near it?

 

I was going to fit one on mine but was advised against it. They are supposed to foul on the tgv housing and generally be much harder to fit than a decent silicone one. Try a Samco or SFS instead IMO.

 

They will fit without a problem but you will need to take the inlet manifold off as you cannot fit it under the intake manifold while it is in place.

They are good quality and will not suck flat like some of the silicone hoses will, plus you could fit manifold raisers while the manifold is removed.

 

Was thinking of getting a set of Grimmspeed manifold raisers aswell, lol..but Cannon, you sold your hard pipe without fitting it, may i ask why?

I was looking at an APS intake, i know i can get my hands on one, but that bloody T peice and extra hosing will screw up my show ad shine bay...lol...

Anyone run a APS turbo pipe?...

 

Bloody hell you've be investigative , I sold it because it was bought to go with a turbo requiring a 76mm coupling size so I needed to get a pipe to suit so I bought the AP pipe with a 76mm coupling hose.

The AP hard pipes are good quality and look good with a red crinkle finish.

 

Nearly forgot sold the car that the turbo and AP hard pipe were going to go on and bought an S202.