Never seen these before!
#1
Scooby Regular
Thread Starter
Join Date: Feb 2009
Location: West Wales
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Never seen these before!
hey guys anyone know what front head lights this guy has, and where to get them?
http://www.pistonheads.com/sales/lar...rv=1¤t=2
http://www.pistonheads.com/sales/lar...rv=1¤t=2
#3
They are easy enough to make yourself if you have a bit of patience, I did it to mine a couple of weeks back.
Just need to remove the lights, melt the glue/sealant to get the glass lens off. (In the oven 100 degrees for 15 mins ish, obviously remove the levelling motor and bulbs) take the silver bit of plastic off (not the reflective lens obviously) sand, prime and paint.
To re-seal the lights afterwards put the light unit and glass lens back in the oven to warm the glue/sealant and simply squeeze them back together. Alternatively you could attempt to remove all the glue and put fresh sealant in.
So for £20 + a bit of your time you could acheive the same result .
Just need to remove the lights, melt the glue/sealant to get the glass lens off. (In the oven 100 degrees for 15 mins ish, obviously remove the levelling motor and bulbs) take the silver bit of plastic off (not the reflective lens obviously) sand, prime and paint.
To re-seal the lights afterwards put the light unit and glass lens back in the oven to warm the glue/sealant and simply squeeze them back together. Alternatively you could attempt to remove all the glue and put fresh sealant in.
So for £20 + a bit of your time you could acheive the same result .