Wilwood.
09 March 2010, 03:28 PM
#1
Scooby Newbie
Thread Starter
Join Date: Mar 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Wilwood.
Hi guys,
Anyone have any information on discs to suit a wilwood conversion on a 2001 impreza p1 the kit consists of 6 pot fronts and 4 pot rears?
I have measured the front discs to be 326mm and spoke to a guy at rally design who thinks they should be 323mm. Would these fit alright.
Im not familiar with this kit and came supplied with the car. its a real pain trying to source these parts so any info would be appreciated
Cheers
Kev
Anyone have any information on discs to suit a wilwood conversion on a 2001 impreza p1 the kit consists of 6 pot fronts and 4 pot rears?
I have measured the front discs to be 326mm and spoke to a guy at rally design who thinks they should be 323mm. Would these fit alright.
Im not familiar with this kit and came supplied with the car. its a real pain trying to source these parts so any info would be appreciated
Cheers
Kev
09 March 2010, 06:00 PM
#4
Scooby Regular
iTrader: (5)
Join Date: Jan 2008
Location: Dublin, Ireland
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Might be good idea to find out what calipers are they exactly.
There should be numbers on those calipers somewere, you can use those to identify them, and find out what pads and discs you need.
And most of those calipers work with some range of discs, so both diameters may be ok.
Depends of course also on your adapters, you have to fit calipers.
There should be numbers on those calipers somewere, you can use those to identify them, and find out what pads and discs you need.
And most of those calipers work with some range of discs, so both diameters may be ok.
Depends of course also on your adapters, you have to fit calipers.
Thread
Thread Starter
Forum
Replies
Last Post
