sookx1

hi guys, just wondering where i could get hold of some ferodo 6 pot brake pads DS2500. at a good price. found a set of 4 on ebay, but only need to 2. also while on subject of brakes the goove on my front discs is warn down, does this mean they need changing or will discs work fine with groove worn off. as u can see i have no idea

the front bake set up is ap racing 6 pot tsl kit with 362mm discs

djandyg

iTrader: (2)

when you say 'set of 4' do you mean 4 pads or 4 pairs? As you should always replace the pads on both sides of the axle.
If the discs appear to have quite a lip on them, or seem quite worn/grooved across the face of the disc then its deffo an idea to replace the discs at the same time, bearing in mind that if you find out you need new discs in say 6 months time, then your going to have to replace the pads again, costing you more in the long run. If your unsure quickly pop into a garage and ask them for their opinion on whether the discs will last another run, or whether its worth changing them with the pads.

sookx1

only want front pair for front wheels, also what does FRP3054H mean on the pads, as i have found some on web but they are FRP216H. would these fit my callipers.

the only ones i can find that are the same as my old ones (FRP3054H) are around £225.00 is this the norm price? as this seems alot for pads.

djandyg

iTrader: (2)

couldnt tell you about what pads you would need or the standard prices im afraid as i dont own a scoob (yet )
Just passing on some advice with regards to replacing pads/discs as im a mechanic