hi all i crash my car into the kerb bent streeing tie and bottom wishbone so replaced them then the hub and suspension as i was told these were bent then had it set up on a 4 wheel alignment. still it pulls to the right when i accerate can anyone help

 

Only visit places that require a right turn lol

 

Maybe a brake problem did the caliper get damaged

 

thanks for trying to lift my sprits but this car is pissin me off big time

 

had brakes checked even changed brake pads when it stipped down

 

Did you get a print out after the alignment was done? If so was every wheel adjustment spot on ?

 

i did but he coundt get the bottom of the wheel to kick out enough he couldnt get the camber right. he got it to -0 14 when the right hand is -057 so he give up and charged 95 quid for that

 

Don't want to be the bearer of bad news. I had a accident in my honda hit a curb at speed at a corner.

Afterwards they looked at damage and had snapped a link rod. But they found a kink in subframe. They said that evan after replacing all these parts she may not be right. So vehicle was written off.

 

Mmmmmmmmmm sounds like something is still bent. Can you get it to a specialist nears you, sounds like you need a second opinion.

 

hope not .if i drive the car normal it drives in straight line just pulls when accelerate hard its mad. i have that dccd mode in the car if i put in the green at the botton it dosent do it just mad

 

hey thanks all for your help going to get second opinion from a crash specialist finger crossed all ok

 

Yeah I hope so!
Thinking about what you said regarding the dccd, it makes sense if your putting power through the rear diff ( green ) no problem, but when power is delivered through the front or equal the problem occurs it just point to something wrong with the damaged area