KINGTIGER

Hey all,
Have just fitted my new bumper and fog lamp covers other day and car looks smashing again.

Just need to know how to properly affix the STI Logo graphics onto the fog lamp covers.

How do I go about doing this correctly

Neil

lee1184

the best way to do it is make sure the covers are spotlessly clean and then as you peel off the sticker from the backing paper spray them with water and that allows you to position them properly, then simply just squeege out the water and leave them to dry naturally.

Well thats how i have done it in the past with other things and it works well for me..

alcazar

iTrader: (2)

Peel off the paper that looks like masking tape, lay the STi logo in place, press firmly, then burnish in place with a hard surface: I use a Biro top.
Then gently peel off the top paper. Done.

[-(o)-]

iTrader: (1)

The sticking is easy, its the positioning thats a nightmare! I used masking tape to give me some datums to work from and then cut an even border around the logos (still on the backing paper) to get each side even. Most definitely not easy.