ecu reset, and fault codes,
My subaru impreza wrx 1993 has 3 faults. . 1.throttle position sensor 2.speed sensor. 3.boost soleniod, my speedo popped out of the back about a month ago so the engine light came on, when I read the fault code I noticed the other two faults, but when I tryed resetting the ecu the fault codes was still there, I have tryed resetting the ecu a few times now and they don't go away,
Am I doing something wrong ? This is what I do :
1. Connect both plugs under dash
2. Turn ignion on, engine off
3. Press accerater for a few seconds
4. Bring up to half way for a few seconds
5. Start car
6. Unplug wires
Any help please
Am I doing something wrong ? This is what I do :
1. Connect both plugs under dash
2. Turn ignion on, engine off
3. Press accerater for a few seconds
4. Bring up to half way for a few seconds
5. Start car
6. Unplug wires
Any help please
Former Sponsor
iTrader: (4)
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM



