KAS35RSTI

iTrader: (73)

Hi people hope all id good. I am thinking about flowing some classic UK 2000 injectors to 900cc, but im not too sure if i will face any issues such as idle problems? They can only be flowed to 900cc and not less. I am looking for low 400hp, so i was assuming my mapper could work his wonders to map it accordingly?

any help/advice appreciated

g7prs

iTrader: (5)

There was a thread like this the other day.

https://www.scoobynet.com/general-te...00-420bhp.html

The Stitcher

iTrader: (12)

think you need some 550cc or 650cc injectors as 900cc will be far to much for what you want

have you also got the supporting modz like fuel pump / pressure reg etc...??

wrighty338

iTrader: (33)

if youve got an adjustable reg you could have them flowed and regulate the pressure down but surly you will still only be using little over half the injectors capability. 550/650cc will do you..

KAS35RSTI

iTrader: (73)

Yes do have supporting mods such as fuel pump but not the FPR as im not to keen on that mod.

thanks for the thread

I found that flowing the injectors would be more economical

If any one has a used set of injectors above 550cc, i will happily buy them.

TonyBurns

iTrader: (3)

What else have you done with the car? as everyone has said (depending on what model/year your car is?) you need bigger injectors.

Tony

KAS35RSTI

iTrader: (73)

Car is a V4 type R with simtek, 2.5, VF24 but upgrading to AF20G, s/s exhaust/headers/uppipe & many other bits.