Clutch Return Spring
#1
Clutch Return Spring
Does anyone know the part number for the Clutch Return Spring, car's a My94.
The Clutch pedal doesn't fully come back up until I tap the underneath with my foot. Needs replacing as it's making my DC's dirty, lol.
Thanks in adavnce
The Clutch pedal doesn't fully come back up until I tap the underneath with my foot. Needs replacing as it's making my DC's dirty, lol.
Thanks in adavnce
#2
I had this problem with my99 turbo. I tried bleeding the clutch, checked the spring under the intercooler etc. The problem turned out to be the treaded rod that is attached to the clutch pedal that comes back from the master cylinder had wound itself in.
To fix this I wound the locking nut to the end of the thread so it was tight. Then with a spanner wound the threaded rod out. "anti clockwise". Making sure the locking nut was tight at the end of the thread so the whole thing was turning. I did this until the spring returned the pedal all the way back up. Then I loosened the locking nut a wound back down to the pedal arm and tightened back up.
It only took me 5 mins. I was kicking myself because I had tried everything else.
Hope this makes sence. Give it a go!
To fix this I wound the locking nut to the end of the thread so it was tight. Then with a spanner wound the threaded rod out. "anti clockwise". Making sure the locking nut was tight at the end of the thread so the whole thing was turning. I did this until the spring returned the pedal all the way back up. Then I loosened the locking nut a wound back down to the pedal arm and tightened back up.
It only took me 5 mins. I was kicking myself because I had tried everything else.
Hope this makes sence. Give it a go!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM