Figured I would introduce myself
13 January 2009, 07:24 AM
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Figured I would introduce myself
So lately I have been bored searching for things to do to my wrx and stumbled upon this website. I Figured I would join up since you guys seem to know a lot about these cars and are much kinder than most of the forums here in the united states plus you guys get all the good stuff for these cars. Here are a couple of pictures of my car. Its an 03 wrx with a vf22, 255 fuel pump, 650 injectors, CSS TMIC, and a Turbo XS UTEC engine management tuned by myself.
Last edited by kahunaking; 13 January 2009 at 07:34 AM.
13 January 2009, 07:52 AM
#3
Scooby Newbie
Thread Starter
Join Date: Jan 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I figured I would also ask you guys an odd question, Is any of the USDM stuff prefered than the EDM stuff or is it a "the grass is always greener" because here the EDM parts are the in thing to have so I was wondering if it was the same thing in Europe.
14 January 2009, 07:50 AM
#7
Scooby Newbie
Thread Starter
Join Date: Jan 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I did the roof vent myself. It only took about 2 hours from start to finish. My VF-22 turbo finally gave out on me so its time to upgrade. I also just put some coilovers on the car now, and the next thing I want to do is pick up an EJ207 motor but they are hard to come by here so I may have to settle for the usdm 2.5 motor. But one good thing is we only need the rear plate here and a personalized plate costs 20 dollars.
Trending Topics
14 January 2009, 08:24 AM
#8
Scooby Regular
iTrader: (1)
Join Date: May 2006
Location: Going sideways is a way of life
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I did the roof vent myself. It only took about 2 hours from start to finish. My VF-22 turbo finally gave out on me so its time to upgrade. I also just put some coilovers on the car now, and the next thing I want to do is pick up an EJ207 motor but they are hard to come by here so I may have to settle for the usdm 2.5 motor. But one good thing is we only need the rear plate here and a personalized plate costs 20 dollars.
I've made mine as small as pos but costs £30 each time the plod see me Its not fair if only we could get the best of both worlds, Jap parts are easy to get here!! Theres a breakers opening every 5 mins lol
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM