powerwrx

iTrader: (11)

are they hydraulic or cable, the wifes clutch has just gone (peddle straight to the floor) nothing happening.

Microstar

I take it you mean 1.25 litre?

Its hydraulic. IIRC slave is inside the bellhousing (3 hours to swap it out) - hope its not the slave!

powerwrx

iTrader: (11)

thanks for that bud, a friend has just had a look and its the plastic rod that connects the clutch pedal to the master cylinder that has snapped, dont know how long that takes to change though.

Microstar

That books at about 0.9 hours chargeable time assuming m/c has to come off.

powerwrx

iTrader: (11)

ok, is there a quick fix do you know..can the plastic rod be replaced or is it a full m/c that will be needed

Microstar

Before you do anything else check that the rod has not simply come unclipped from the pedal unit. Get a replacement clip from the Ford dealer (32p, they will keep them in stock) and maybe add a ty-wrap to keep it in place. This is a common fault.

If the rod has actually snapped then you will need to remove m/c and replace I think.

powerwrx

iTrader: (11)

thanks mate,yeah the rod has snapped, ive got half of it in the house so i think itll be a new m/c job.

thanks for your help