Fitting Blitz DSBC - Any tips?
#1
Scooby Regular
Thread Starter
Join Date: Jul 2008
Location: Ipswich
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Fitting Blitz DSBC - Any tips?
Just purchased a 2nd hand boost controller (no fitting instructions ), i should imagine it's pretty straight forward with the boost hose's etc, just concerned with wiring the electric side really.
Having re-map on Thursday at Mocom, so want to get it in ready for then
Any tips, with the installation will be most helpful, Thanks
Gav
Having re-map on Thursday at Mocom, so want to get it in ready for then
Any tips, with the installation will be most helpful, Thanks
Gav
#2
Scooby Regular
iTrader: (1)
Join Date: May 2006
Location: Scotland
Posts: 1,394
Likes: 0
Received 0 Likes
on
0 Posts
Should only require a power source as i dont think this unit takes any readings from the ECU like the AVCR does.
For the power source use feeds to the cigarette lighter.
Manual here.
Tech Support : Blitz, Power Site
For the power source use feeds to the cigarette lighter.
Manual here.
Tech Support : Blitz, Power Site
#3
Scooby Regular
Thread Starter
Join Date: Jul 2008
Location: Ipswich
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Thants super stuff rob2006, was thinking of taking feed from ciggy lighter.
Just to confirm, I un-plumb the boost solenoid but leave it plugged in to the ecu, And the fuel cut can be raised during the re-map (open port), so no need for a new one.
Cheers
Just to confirm, I un-plumb the boost solenoid but leave it plugged in to the ecu, And the fuel cut can be raised during the re-map (open port), so no need for a new one.
Cheers
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM