exhaust problem
#1
Scooby Regular
Thread Starter
Join Date: May 2007
Location: peterborough
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
exhaust problem
i have been looking at getting a new exhaust rear box for my sti and after making a few phone calls i was asked to check the fitment on to the centre pipe as it should have a two bolt fitting, after checking i found out that the exhaust is a sleave type exhaust all the way though.
so i need a full system
does any one know who makes a exhaust system that is put together with sleves.
cheers
so i need a full system
does any one know who makes a exhaust system that is put together with sleves.
cheers
#2
Revolution do a 3" bore system with 4" tailpipe, can highly recommend it. Very well made super stealth on the noise level though.
Depends what you're after!!
Cat back - £320.00
Depends what you're after!!
Cat back - £320.00
#4
i have been looking at getting a new exhaust rear box for my sti and after making a few phone calls i was asked to check the fitment on to the centre pipe as it should have a two bolt fitting, after checking i found out that the exhaust is a sleave type exhaust all the way though.
so i need a full system
does any one know who makes a exhaust system that is put together with sleves.
cheers
so i need a full system
does any one know who makes a exhaust system that is put together with sleves.
cheers
I got mine from here ... ExhaustsUK: Suppliers of Cobra Sport Performance Exhausts don't know about fitment but worth a chat I reckon v cheap excellent quality I reckon.
Or get the downpipe as suggested and make me an offer for my bloody shiney Prodrive exhaust ..... go on u know you want to !!! I'll even pop it up to the next meet for you
#5
Scooby Regular
Thread Starter
Join Date: May 2007
Location: peterborough
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
yeah think of a full system from cat back now but only wanted a rear box.
i think the bore must be a 4in bore all the way though with a centre box and rear box.
i just want to know who makes these exhausts where you just slide them on as not seen any before on ebay or any of websites etc.
i think the bore must be a 4in bore all the way though with a centre box and rear box.
i just want to know who makes these exhausts where you just slide them on as not seen any before on ebay or any of websites etc.
#6
Scooby Regular
iTrader: (22)
Join Date: May 2006
Location: Doncaster, S. Yorks.
Posts: 21,415
Received 0 Likes
on
0 Posts
yeah think of a full system from cat back now but only wanted a rear box.
i think the bore must be a 4in bore all the way though with a centre box and rear box.
i just want to know who makes these exhausts where you just slide them on as not seen any before on ebay or any of websites etc.
i think the bore must be a 4in bore all the way though with a centre box and rear box.
i just want to know who makes these exhausts where you just slide them on as not seen any before on ebay or any of websites etc.
i have a sleeve type exhaust on my 205gti. aftermarket jobby like, held on with bolted clamps instead of gaskets and nuts/bolts.
if i were you id just get a whole new system. can pick up a decent decat system for around £450-500 from a reputable company like revolution or scoobyworld. or a second hand one from here/ebay
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM