pranged bumper
#1
pranged bumper
I reversed the car (MY2000) into a parking space which had one of those low barriers that you can't see through the rear mirror. I was only going very slowly but it was enough to push the bumper in, i.e. so it is closer to the body on the o/s. Hence it is not flush with the rear quarter. Is this a bodyshop job, or can it be rectified by adjusting the hangers that it is fastened by?
Thanks
Nick
Thanks
Nick
#2
You've probably just squashed the bumper beam carrier a little.
I'd remove the bumper leaving the beam carrier still on the car.
The side that was hit, straighten up the beam to make it look the same as the other side; shape and distance from the car body.
Worth a try over the weekend.
I'd remove the bumper leaving the beam carrier still on the car.
The side that was hit, straighten up the beam to make it look the same as the other side; shape and distance from the car body.
Worth a try over the weekend.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM