Im going to de-tango 2moro :)
#1
Guest
Posts: n/a
Im going to de-tango 2moro :)
im goonna have a go at the blobeye detango 2moro. ive seen a few how-to's and got all the information, so just to make sure is there anything i need to be aware of ? be extra carefull about ?
it all looks straight forward to me.
dan
it all looks straight forward to me.
dan
#5
Scooby Regular
iTrader: (2)
Join Date: Dec 2003
Location: Isleworth, MSOC
Posts: 1,151
Likes: 0
Received 0 Likes
on
0 Posts
Make sure you have your oven on the lowest setting, and put the headlamp units at the bottom, keep checking them every 2 minutes or so. Then gently prize apart, as the mastic is extremely sticky, plus goes hard quite quickly, so you may need to put them back in the oven for a couple of mins after removing the tangoed bits.
#6
Guest
Posts: n/a
Make sure you have your oven on the lowest setting, and put the headlamp units at the bottom, keep checking them every 2 minutes or so. Then gently prize apart, as the mastic is extremely sticky, plus goes hard quite quickly, so you may need to put them back in the oven for a couple of mins after removing the tangoed bits.
dan
#7
Scooby Regular
iTrader: (4)
Join Date: Jul 2001
Location: MSOC..........middlesex subaru owners club
Posts: 10,429
Likes: 0
Received 0 Likes
on
0 Posts
for me the hardest bit was having to flex the wing to get the
headlight unit out
well worth the effort though
did mine today thinking it would be easy on the hawkeye
https://www.scoobynet.com/members-ga...-tangoing.html
budgie
btw if you get stuck i am only down the road
headlight unit out
well worth the effort though
did mine today thinking it would be easy on the hawkeye
https://www.scoobynet.com/members-ga...-tangoing.html
budgie
btw if you get stuck i am only down the road
Trending Topics
#9
Guest
Posts: n/a
for me the hardest bit was having to flex the wing to get the
headlight unit out
well worth the effort though
did mine today thinking it would be easy on the hawkeye
https://www.scoobynet.com/members-ga...-tangoing.html
budgie
btw if you get stuck i am only down the road
headlight unit out
well worth the effort though
did mine today thinking it would be easy on the hawkeye
https://www.scoobynet.com/members-ga...-tangoing.html
budgie
btw if you get stuck i am only down the road
dan
#11
hi im new to the forum
ive just de tango,d my sti 53 plate after my trip to the scooby shoot out
what i need to now is what bulbs do you put in i dont want to paint the clear ones , sorry if its a common question but i have searched thanks guys
any links would be great
thanks again
ive just de tango,d my sti 53 plate after my trip to the scooby shoot out
what i need to now is what bulbs do you put in i dont want to paint the clear ones , sorry if its a common question but i have searched thanks guys
any links would be great
thanks again
Last edited by tedvagas; 27 May 2008 at 08:33 PM.
#12
Scooby Regular
#15
Scooby Regular
iTrader: (3)
Join Date: Jan 2008
Location: Wolves
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
The guide I used was I've been de-tangoed - Subaru Impreza Drivers Club worked a treat not as bad as folk have been saying worst bit his pushing the headlight of those clips.
Thread
Thread Starter
Forum
Replies
Last Post