CEL
19 November 2007, 03:06 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2007
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
CEL
It keeps flashing on, werther im going fast or slow.
BUT i have noticed if i slow right down and nearly come to a holt, in nutral or with the clutch in, it turns off.
Anybody had this problem?
BUT i have noticed if i slow right down and nearly come to a holt, in nutral or with the clutch in, it turns off.
Anybody had this problem?
19 November 2007, 04:04 PM
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
what year?
classics you can check by connecting the connectors under the dash
see under the help www.JollyGreenMonster.com - Engine management specialist
if a newage then you need an OBD2 cable and software etc but your description pointers perhaps to neutral position sensor.
Simon
classics you can check by connecting the connectors under the dash
see under the help www.JollyGreenMonster.com - Engine management specialist
if a newage then you need an OBD2 cable and software etc but your description pointers perhaps to neutral position sensor.
Simon
25 November 2007, 11:10 PM
#5
Scooby Regular
Thread Starter
Join Date: Feb 2007
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
Im getting these codes on a cold engine check with the black plugs
11
23
31
24 and 24 again
Cars running sweet tho...
Allready changed the MAF a cupple of months ago. and cleared the numbers after my oild and filter change.
11
23
31
24 and 24 again
Cars running sweet tho...
Allready changed the MAF a cupple of months ago. and cleared the numbers after my oild and filter change.
26 November 2007, 10:41 PM
#7
Scooby Regular
Thread Starter
Join Date: Feb 2007
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
I have cleared the codes before (After fitting my new MAF and doing my oild and filter change (About a month ago) )
It was slightly diffrent to your instructions tho, ill try it your way now.
It was slightly diffrent to your instructions tho, ill try it your way now.
Thread
Thread Starter
Forum
Replies
Last Post
DazV
Computer & Technology Related
5
12 April 2002 02:44 PM
