Mines z4 ECU
12 October 2007, 11:10 AM
#1
Mines z4 ECU
Just checked my ecu and found it to be a Z4 with a Mines Plaque on it. Ive looked up the info on the Mines ecu and it doesnt looked go.
Here comes the but, my boost runs at 0.95 bar without the dawes fitted. The car pulls all the way in all gears on esso super unleaded, no splutters or anything. The 112mph speed limit is still there.
The ecu case is still sealed. The car exhaust pops now and then, more if I drive it hard coming off boost or changing down gears.
So far the car is setup with the dawes fitted and set to 1.05 bar, front mount intercooler, apexi air cone, ihi turbo and oil cooler. Also fitted a de-limter to the speedo head.
What do I do here ?, replace the ecu, leave it like it is, fit a ecu chip.
Help...
Here comes the but, my boost runs at 0.95 bar without the dawes fitted. The car pulls all the way in all gears on esso super unleaded, no splutters or anything. The 112mph speed limit is still there.
The ecu case is still sealed. The car exhaust pops now and then, more if I drive it hard coming off boost or changing down gears.
So far the car is setup with the dawes fitted and set to 1.05 bar, front mount intercooler, apexi air cone, ihi turbo and oil cooler. Also fitted a de-limter to the speedo head.
What do I do here ?, replace the ecu, leave it like it is, fit a ecu chip.
Help...
Last edited by slipstream_uk; 12 October 2007 at 01:31 PM. Reason: .
12 October 2007, 01:18 PM
#2
Scooby Regular
Join Date: Aug 2002
Location: Wickford, Essex - GamerTag - lCE
Posts: 2,570
Likes: 0
Received 0 Likes
on
0 Posts
If you don't mind spending some money I'd definitely recommend getting a new ecu, power fc seems to be the one to get. That way you can have the car set up properly and will be the better option in the long run.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
