Back Box advice (sorry)
#1
Scooby Regular
Thread Starter
Join Date: Oct 2007
Location: Skunthorpe/Doncaster (UK)
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Back Box advice (sorry)
Hey folks, Just got a 56 plate WRX and wanted some opinions on what back box to get, its still standard and well obvious reasons want something that does not hide the noise.
I understand the 2006 onward WRX requires a back section that is about 1" longer in overall length as they changed the exhaust slightly. Hence if I want something that does not require spacers etc and just fits I have a reduced choice.
Seemingly a Supersprint a Peco or a Magnex... or I could have a custom one made up.
I am after a warm rich flat 4 burble not interested in shear decibels and I don't want anything raspy or harsh.
Any thoughts?
(PS sorry if I am asking a done to death question, I am kinda new here and not seen anything covering this yet.)
I understand the 2006 onward WRX requires a back section that is about 1" longer in overall length as they changed the exhaust slightly. Hence if I want something that does not require spacers etc and just fits I have a reduced choice.
Seemingly a Supersprint a Peco or a Magnex... or I could have a custom one made up.
I am after a warm rich flat 4 burble not interested in shear decibels and I don't want anything raspy or harsh.
Any thoughts?
(PS sorry if I am asking a done to death question, I am kinda new here and not seen anything covering this yet.)
#4
Scooby Regular
Join Date: Apr 2004
Location: Tynemouth
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
I've heard a RaceBox on an '06 Spec D, sounded very nice yet still very subtle.
Don't know about it fitting a '06 but I recently got a ScoobyWorld Ninja that is louder and fits your sound criteria...
Don't know about it fitting a '06 but I recently got a ScoobyWorld Ninja that is louder and fits your sound criteria...
#5
Scooby Regular
iTrader: (1)
Join Date: Jul 2007
Location: Hull
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
have a look here
http://www.scoobyworld.co.uk/catalog...products_id=76
#7
Stainless steel exhausts manifolds and headers from Hayward and Scott
http://www.scoobyworld.co.uk/catalog...2b75d6dc05bb67
http://www.scoobyworld.co.uk/catalog...2b75d6dc05bb67
Last edited by scobymad; 08 October 2007 at 02:02 PM.
Trending Topics
#10
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
Got an 04/05 Prodrive backbox on my 06 and its fits fine so not sure if you are limited at all, it does not stick out that far from the bumper though so is quite subtle, I can dig out a pic if you want, also sounds great with a deresonated centre section, which you'll want if you have a 2.5 56!
#12
Scooby Regular
iTrader: (2)
Join Date: Nov 2006
Location: Kippis near Casvegas
Posts: 3,404
Likes: 0
Received 0 Likes
on
0 Posts
Got an 04/05 Prodrive backbox on my 06 and its fits fine so not sure if you are limited at all, it does not stick out that far from the bumper though so is quite subtle, I can dig out a pic if you want, also sounds great with a deresonated centre section, which you'll want if you have a 2.5 56!
#14
Scooby Senior
iTrader: (41)
Get yourself an unwanted STi BB from someone that has 'upgraded' their back box. Can be had for as little as £50. Then get a straight through centre section currently £70 I think on the H&S group buy.
View my scooby for sound. I have the additonal Sports cat and rear de-cat pipe, you might also consider fitting the latter. This is the only part that needs to be longer than the pre MY06 WRX's as the down pipe on these cars is shorter.
View my scooby for sound. I have the additonal Sports cat and rear de-cat pipe, you might also consider fitting the latter. This is the only part that needs to be longer than the pre MY06 WRX's as the down pipe on these cars is shorter.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM