Need advice for front entry conversion !
#1
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jan 2007
Location: Gloucestershire
Posts: 2,541
Likes: 0
Received 0 Likes
on
0 Posts
Need advice for front entry conversion !
I've posted in General technical with no reply so i'll try here
I'm going to be fitting either an 18g or 20g turbo to my '96 WRX from Andy Forrest. I have the inlet manifold off the engine waiting for all the parts that are needed.
I know I need some manifold spacers,where's the best place to get them from ?
Do I need to change the power steering pump/resevoir as i've heard that it gets in the way and you need to fit a later pump.
What inlet hose do I need to get and where from ?
Any help will be appreciated.
I'm going to be fitting either an 18g or 20g turbo to my '96 WRX from Andy Forrest. I have the inlet manifold off the engine waiting for all the parts that are needed.
I know I need some manifold spacers,where's the best place to get them from ?
Do I need to change the power steering pump/resevoir as i've heard that it gets in the way and you need to fit a later pump.
What inlet hose do I need to get and where from ?
Any help will be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM