The Rig

iTrader: (13)

How much movement do you have on the intake/Maf area ?

as i have the earlier scoob, have a little bit more hosing and its that ribbed kind so has movement in it, have used a bracket but still i can vibrate it by hand, wahoo missus, just wondering if other induction kits out there have movement or are totally rigied.

im using a greddy airinx, an old stlye one

cheers

myblackwrx

iTrader: (1)

My Apexi is as stiff as a corpse.



It has a bar connecting it to the car at the top left of the MAF and one connecting it to the car at the bottom left of the MAF

martyrobertsdj

iTrader: (1)

That filter needs a clean mate!!

myblackwrx

iTrader: (1)

.

Old picture

The Rig

iTrader: (13)

cheers,will see if i can add another bracket to make it more rigid,theres not much choice of places to bolt brackets to tho !

The Rig

iTrader: (13)

This is how mine is mounted, the bracket is a bit ugly as the bolt that holds the boost solenoid bracket onto the car sheared off so i had to adapt it abit.

myblackwrx

iTrader: (1)

What about a bracket from (as looking at the picture) one of the screws on the right hand side of the IK to bodywork where mine is (if you look at the bottom of my picture) as there were some holes there already on mine.

The Rig

iTrader: (13)

that would be good,but its getting a bracket to fit, as the pic is a bit misleading, the holes are a fair bit away and at a funny angle