Ver 5 STi 4 door saloon - rear seats
#2
Scooby Regular
iTrader: (2)
Working from the REAR of the car:
1. A rigid sheet of black plastic, seems to be corrugated, about 3-4mm thick. Can be seen from INSIDE the boot.
2. Bolted OVER this is a sqaure section steel bar which supprts the middle of the seat, and runs horizontally.
3. Over THAT is a piece of sound deadening, thick felt with a plastic outer face, (facing INTO the car).
1, and 3 are held in by trim clips. 2 is held by two bolts with IIRC 14mm heads. (Could be 16mm, cant remember), but they are threaded into holes with captive threads in the sides of the rear panel.
HTH, Alcazar
1. A rigid sheet of black plastic, seems to be corrugated, about 3-4mm thick. Can be seen from INSIDE the boot.
2. Bolted OVER this is a sqaure section steel bar which supprts the middle of the seat, and runs horizontally.
3. Over THAT is a piece of sound deadening, thick felt with a plastic outer face, (facing INTO the car).
1, and 3 are held in by trim clips. 2 is held by two bolts with IIRC 14mm heads. (Could be 16mm, cant remember), but they are threaded into holes with captive threads in the sides of the rear panel.
HTH, Alcazar
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM