sump gasket /paste
#4
its rubber gaskets and there is a outer two inners and 5 or 6 bolts seals also
its fiddlerly but can be done at home
either side ya will need to remove air box etc or battery washer bottle to make ya life a bit more simle
done both side on mine and that a 95
sorry just got out of bed as i was on a night shift
lol read ya wrong i talking about rocker covers
never done a sump gasket
excuse my tiredness
its fiddlerly but can be done at home
either side ya will need to remove air box etc or battery washer bottle to make ya life a bit more simle
done both side on mine and that a 95
sorry just got out of bed as i was on a night shift
lol read ya wrong i talking about rocker covers
never done a sump gasket
excuse my tiredness
Last edited by madmooro; 19 June 2007 at 12:57 PM.
#5
Scooby Regular
Join Date: Nov 2004
Location: In a 405 BHP/360 ft/lb P1 with SN superstar Sonic dog at my side!
Posts: 1,959
Likes: 0
Received 0 Likes
on
0 Posts
There is no gasket.
Use a quality sealant - NOT hylomar or the like. Don't use too much of it either.
3 bond 1215 grey is the best stuff.
Use a quality sealant - NOT hylomar or the like. Don't use too much of it either.
3 bond 1215 grey is the best stuff.
Trending Topics
#10
Scooby Regular
Join Date: Nov 2004
Location: In a 405 BHP/360 ft/lb P1 with SN superstar Sonic dog at my side!
Posts: 1,959
Likes: 0
Received 0 Likes
on
0 Posts
#13
Scooby Regular
Join Date: Nov 2004
Location: In a 405 BHP/360 ft/lb P1 with SN superstar Sonic dog at my side!
Posts: 1,959
Likes: 0
Received 0 Likes
on
0 Posts
It's sh1te!
Do the job once and do it right.
Using propiertry sealants on engine builds is asking for trouble....poor sealing, beads coming loose in the hot oil and collecting on the oil pipe pick up strainer etc.....
Hylomar is ok for sealing an old gasket that you cant be bothered to replace on a non critical application but for anything else it is asking for trouble.
Do the job once and do it right.
Using propiertry sealants on engine builds is asking for trouble....poor sealing, beads coming loose in the hot oil and collecting on the oil pipe pick up strainer etc.....
Hylomar is ok for sealing an old gasket that you cant be bothered to replace on a non critical application but for anything else it is asking for trouble.
Thread
Thread Starter
Forum
Replies
Last Post