A little help please
22 October 2006, 02:45 PM
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
A little help please
I've just fitted a FMIC to my Wrx, been running ok for a week and i've done a good few miles. Anyway yesterday I was driving and there was a slight pop and I lost all boost (almost like an air leak).
I've checked all hose clips and pipework, had the battery off to reset the ECU (got told to try this) but its still running lumpy got abit of smoke out the back too.
Any Ideas
I've checked all hose clips and pipework, had the battery off to reset the ECU (got told to try this) but its still running lumpy got abit of smoke out the back too.
Any Ideas
22 October 2006, 03:10 PM
#2
Scooby Regular
Join Date: Aug 2006
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WaltonWRX
I've just fitted a FMIC to my Wrx, been running ok for a week and i've done a good few miles. Anyway yesterday I was driving and there was a slight pop and I lost all boost (almost like an air leak).
I've checked all hose clips and pipework, had the battery off to reset the ECU (got told to try this) but its still running lumpy got abit of smoke out the back too.
Any Ideas
I've checked all hose clips and pipework, had the battery off to reset the ECU (got told to try this) but its still running lumpy got abit of smoke out the back too.
Any Ideas
22 October 2006, 03:13 PM
#3
Scooby Regular
Join Date: Aug 2003
Location: Sheffield; Rome of the North
Posts: 17,582
Likes: 0
Received 0 Likes
on
0 Posts
Thats the first thing that Id think too. Perhaps its a split thats only evident under boost; that cant be easily seen under atmospheric pressure?
Simon
Simon
Last edited by GC8; 22 October 2006 at 03:32 PM.