BOARDER11

HI GUYS JUST PURCHASED 2001 STANDARD WRX BUGEYE WANT TO INCREASE BHP TO HIGH 200 INSTEAD OF STANDARD 221 .TO MANY OPTIONS OUT THERE AM A BIT LOST.NEED SUGGESTIONS ONWHAT TO DO AND WHERE TO DO IT LIVE NEAR GLASGOW SO AS CLOSE TO HOME AS POSS. IS IT A NEW TURBO EXHAUST HELP PLEASE

Nate

iTrader: (2)

Full decat....... up pipe, down pipe, centre and rear box, Panel filter and a remap .... You should get around 280- 290 BHP .

Not sure about places for you to go where you live though

nigel s

Standard BHP for bugeye was 215, this was increased to 225 on the later bolbeye shape. Start with exhaust and panel filter. The bug has three cats as standard, downpipe, uppipe & centre cat. You will need as least the downpipe cat or replace this with sports cat to pass mot, the others can be changed to cat free to help free up the gas flow. After this stage would be fuel pump swap, intercooler to maybe one from later STI and pink STi injectors to give 300+

MaDaSS

Glasgow? You have Andy Forrest up that neck of the woods i think? Mapping guru and Subaru extraordinaire! His reputation precedes him.
http://andyforrestperformance.co.uk/
If you want the dogs danglies car detailing doing, contact these ppl, bloody awesome work i have only seen on here, but again their reputation precedes them. Polished Bliss they are called.
Look for some of their work in the car care section of this webby.
http://www.polishedbliss.co.uk/index.html

As for mods, loads and loads, its all to do with your money really.
Lots of ppl on here can tell you where to go i would have thought, but if you gave Andy F a phone, he would help i am sure.

EDIT:- Just looking on RAC map webby, Andy Forrest is only an hour and a bit away from you