The Rig

iTrader: (13)

If i got hold of some of these, is it a straight swap onto my my95, i know id have to buy the 295mm front discs etc, but will the 4 pots bolt on and be o.k, the wheels are 16"

For the rear, what would be the disc size for the brembo 2 pots ?

cheers.......

turboDean

iTrader: (4)

295mm disc's are for "Subaru" 4 pots, Newage STI Brembo's have 325mm disc's, but yes they are straight bolt on, but 16" wheels won't clear them, you need a min of 17" and with the right off set.

Brembo rears are not straight bolt on for a classic, it is quite a major job. them calipers don't bolt straight on and the handbrake drum on the disc is a different size.

Pic of brembo's on my classic with 18's:

The Rig

iTrader: (13)

cheers matey,too much hassle for me,stick to me 2 pots i think

thanks......

BuRR

16" wheels will clear the Brembos that were part of the group buy from red dot racing some time ago - I had some on my Scoob when I had it, and yes they bolted straight on (needed specific discs and bells however)

the STI calipers (in the pic above) need wheels with a larger offset/clearance to clear the calipers.... STI7 or similar alloys will suit, but you'll either have to have a sensible choice of tyre (to stop rubbing on the arches) or have your arches rolled.