Couple of questions....

Front lip carbon spoiler.....only seen it on an STI. Anyone seen one for a WRX?

Anybody changed their standard wheels? I like the P-WRC1, but actually quite like normal STI wheels, do these come in 18?

I assume that it is still the norm that they recommend that you have 18's after PPP? (But seen as it is standard on WRX300 sell it with 17's )

 

Actually maybe I mean the wheel that is on JDM Sti? Its not the one that is on UK

 

OK....nobody has seen a lip spoiler for a WRX?

 

There's a lip spoiler available at ScoobyWorld (TRU V-Lip).

I know AndyF acquired a Newage WRX with a front lip carbon spoiler.

I changed the original wheels to some 18's PFF replicas. £695 from Wheelbase including Toyo T1-S tyres. Good price and service.

 

Thanks for that. Does anyone know what the model of wheel is that is on the JDM & Fsti?

 

scott lowe also do lips for wrx's

 

Yeah its the TRU V-Lip again....I want a carbon fibre jobby

 

the sti's std are 17" the only 18 inch are aftermarket. if you buy the sti corner splitters for your wrx bumper then you can fit and sti splitter or carbon splitter etc. there are splitters for wrx but look btter with sti corner pieces. they are only 120 and available from dealer

 

i want anthracite p-wrc's for my wrx300 too. also going to get round to buying the sti corner splitters and a carbon front lip

 

 

Thanks for that...

Just looked at STI shots

http://www.oakos.com/wrx/gallery/03NAIAS/

It is these BBS wheels which I think come on JDM's that I would like?

 

Is this price painted and fiited?

 

Why is it so hard to find this wheel....

http://www.oakos.com/wrx/gallery/03N...i_2004_008.JPG

 

If you're prepared to wait 10+ weeks...

 

someone correct me if im wrong but some of the sti wheels like those wont fit? the later sti's have wider rear arches and the alloys aparently wont fit. i found this out when looking to but some of the sti spec c type RA wheels.

 

plenty on ebay usa or speak to these. they will ship for you and have a good rep. they also knowledgeable. www.rallysportdirect.com you can talk online like a messenger service

 

Heres a wee pic of my WRX300 with a Prodrive front splitter (£160) and Sti 03 wheels fitted.

the 2005 STi wheels dont fit as the stud pattern is 5x114.3 rather than the standard 5x100 on all other models.



Gus

 

Nice, thanks for that. What spoiler is on the back, or did you get it as a freebie on a 55 reg?

 

I cant see how we can do this to our cars as the corners are integral to the whole bumber assembly. Maybe Patkin can confirm if it is the same on his SWRT Limited Edition....

Mark

 

Unless the corner pieces go on top of the OEM bumper?!

 

I cant see this on the Prodrive site? Was that price painted?

 

I see the Spec D / A Line comes with Enkei rims which look identical to the BBS ones......yet again though on the Enkei site they are not listed....

 

http://www.edmunds.com/insideline/do.../photoId=27749

Are these rims on all new STI's?

 

Yes, those are the standard fit on the 05 sti and 06 sti but are 114.3 stud pattern so, wont fit your 300.

Gus

 

Its from Subaru direct rather than Prodrive but is classed as a Subaru Prodrive part. Subaru were doing it on a special @ the turn of the year for £65 plus painting was approx £95. so £160 all in.

Regarding the rear spoiler, I supply them through a contact.

here it is from the rear



and from another angle on my mate Brians car

 

Mark, I had these Sti winglets on my car before I fitted the prodrive splitter. They can be purchased from any Subaru dealership (already painted to your colour code for £140 approx) they fit over the bumper rather than being an integral part. they sit into the bumper lip and are held on with a few gromits along the bottom edge and inside the lip of the wheel arch. The gromits can also be had from any Subaru dealership you will need 8 if I remember correctly to fit both corners.

Heres a pic before the change.



hope this helps? any questions just ask.

Gus

 

Gus, with regards to the above, did you have to cut slots in the bumper?

also have you still got them/ are they for sale ?

 

Damn I wish you could see ALL the Subaru accessories online. The UK web site is terrible and my dealer appears to have disappeared Barretts

 

http://www.subaru.co.uk/imggb/www/subaru_accessories.nsf/NULL/3FA8A0170FA8927D8025715400363550/$FILE/2006%20WRX%20PPP.pdf

Ohhh, hello, anyone know anything about this new spoiler shown on the WRX PPP info?

 

Nope mate. I had to cut two or three plug gromits from the inside line of the winglets and used M3 tape to stick on that side of things. Meant I could take them off again if I changed my mind (which I did ) and not leave any holes in the bumper. Worked a treat btw.

PS sorry, sold the winglets to another 300 driver