jpmason33

Can anyone help on this

I run a MY99 UK turbo with the following Mods

Full Magnex Decat
Sti Panel Filter
JB TEK 2.5
Dawes set to 1.1

i was wondering what the approximate Power and Torque output of my car would be?

Cheers

J

PhilA

Just my guess:
MY99 with decat and filter approx 230-235 BHP.
TEK 2.5 ECU + 25/30BHP (not sure on Tek2 stuff)
Dawes set to 1.1 BAR + 10BHP

= 265-275 BHP ???

TonyBurns

iTrader: (3)

1.1bar is approx 250bhp.
This is about the same as the PPP cars (they peak at 1.2 and run 1.1bar).

Tony

StiX

iTrader: (4)

As a basis for comparison:

MY00
Jr panel filter
Magnex cat-back
Ninja Sports cat downpipe

Before Tek3 - 230bhp

After Tek3 - 272bhp @ 1.25bar, 272 lbft (mapped 1 week ago at Powerstation, needed to use a 3 port boost solenoid also).

PhilA

Tony: is that correct what you said about the boost? My PPP boost only seems to hit 14 PSI which is approx 1.0 bar.
I've also heard it is impossible to change the boost levels from an ECU map which is what the PPP ECU is compared to a non PPP car.
But I hear a lot of things.