How to remove graphics/Decals ???
or if its a small deacall and you dont have a extension leed, just boil some water and a cloth ,dip in water and hold on sticker then peel off
worked for me,
i then used a very very little tcut to blend, you now cannot see any difference !
worked for me,
i then used a very very little tcut to blend, you now cannot see any difference !
I removed the large WRX decal off the back of my car last week.
As already mentioned, use a hair dryer to warm it up and it will come
off easily, you will then be left with the adhesive underneath, use WD40
to dissolve that and rub with a cotton cloth.
Worked a treat on my car !
Rob
As already mentioned, use a hair dryer to warm it up and it will come
off easily, you will then be left with the adhesive underneath, use WD40
to dissolve that and rub with a cotton cloth.
Worked a treat on my car !
Rob
Trending Topics
I did mine just before xmas. What a bleeding nightmare. The white ones and dark silver came off nice and easy with a hair dryer. Bug and tar remover got the residue off no problems.
The light silver was so thin it just broke in my fingers. One weekend and I'd barely done one side. Thank god Stickystuff came to my rescue and for a small fee did the business for me and even gave it a wax and polish.
If yours was anything like mine I just hope you're a patient man.
Gone for the Stealth look Bubba. Dont have any pictures of the stickerless look but much happier (I think).
The light silver was so thin it just broke in my fingers. One weekend and I'd barely done one side. Thank god Stickystuff came to my rescue and for a small fee did the business for me and even gave it a wax and polish.
If yours was anything like mine I just hope you're a patient man.
Gone for the Stealth look Bubba. Dont have any pictures of the stickerless look but much happier (I think).
Thread
Thread Starter
Forum
Replies
Last Post





