terryb

Anyone ever had this done? How long does it take and what sort of cost please?? Only for rears.

Cheers

Terry

struv

hi m8 i own a bodyshop in the northeast and usualy rolling the arches cracks the paint so i would say if your cars a metalic finish to do rears your looking at £200 ish

Robbie T

iTrader: (8)

I had the rear arches rolled on my old golf VR6 by a mobile fella, he charged me £80. He used a heat gun to make sure he didn't crack the paint and he didn't

I'm afraid i don't have any contact for him but you might be worth looking in max power or the like (i know, i know ) for other people offering this service.

RobHardy

The more you pay, the better. One of my very first cars, I gad done by RTec, I cannot quite remember if it was £40 or £80 labour (Probabally the latter, £40 each side), and the job they done wasn't to impressive. Maybe they do so many, they get fed up and do a crap job, but thats not really the attitude.

911

Conrad can do it. Go to David Wallis' project thread and look through that, details are there.
He fits a former to the wheel hub and strikes a radius off that and progressivly turns the edge. No cracked paint he says!
Graham.

A5HYV

In West Yorkshire give Storm Motorsport a call. They have done loads and have it done to their own Demo subaru. They charge approx £50-£60 per arch but it is a top job with no Cracks.

See WWW.Stormmotorsport.co.uk and look at the subaru gallery section.

Ash

terryb

Thanks for the replies guys. I'm down in Portsmouth - so will have to check out local bodyshops. But at least i now have an idea of what I should be paying.

Cheers

Terry