K&N Typhoon
17 September 2005, 06:13 PM
#2
Scooby Regular
Join Date: Jul 2005
Location: essex
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Have heard of indution kits causing maf problems,i cant confirm this as i have never fitted an induction kit,always went with an uprated panel,best to ask a good scooby tuner but it seems u will always get a diffrent ansewer the more people u ask.
17 September 2005, 06:23 PM
#4
Scooby Regular
Join Date: Apr 2005
Location: South East - "Keep Attacking The Ring"
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
MAF problems don't affect the new-age cars to the best of my knowledge.
An induction kit will help power but you need cold air ducting and inlet temps will rise easily in slow moving traffic, so expect minor driveability issues there. Believe a remap is strongly recommended with an induction kit even if you have only a partial de-cat. With most kits you will get a loud roar (some don't like it).
An induction kit will help power but you need cold air ducting and inlet temps will rise easily in slow moving traffic, so expect minor driveability issues there. Believe a remap is strongly recommended with an induction kit even if you have only a partial de-cat. With most kits you will get a loud roar (some don't like it).
20 September 2005, 10:31 PM
#6
Scooby Regular
Join Date: Dec 2001
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by byebye gti
Ace. Nice one, much appreciated
Sandman
22 September 2005, 07:23 PM
#7
Scooby Newbie
Thread Starter
Join Date: Sep 2005
Location: Middx
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sandman
I have a 2001 bugeye and was the original test vehicle for K AN N for this kit, sounds great !! ran like bag of spanners at the top end ie way to lean !!! engine was detting like mad .....engine damage ,took it off now run quality panel filter. The car would take it but would need to be mapped with it on
Sandman
Sandman
Thread
Thread Starter
Forum
Replies
Last Post