auto to manual
#2
Never done this particular changeover but it would be usual to need :-
Flywheel,
Clutch pedal unit,
Clutch assembly,
Clutch hydraulics.
You would need to compare the gearbox mountings and drive shafts.
If your gearbox has an oil cooler (usually mounted in front of the radiator) you would need to remove it.
The ECU might be different, no doubt someone else will be able to tell you this.
Hope this helps/
Flywheel,
Clutch pedal unit,
Clutch assembly,
Clutch hydraulics.
You would need to compare the gearbox mountings and drive shafts.
If your gearbox has an oil cooler (usually mounted in front of the radiator) you would need to remove it.
The ECU might be different, no doubt someone else will be able to tell you this.
Hope this helps/
#3
Scooby Regular
Join Date: Aug 2003
Location: Sheffield; Rome of the North
Posts: 17,582
Likes: 0
Received 0 Likes
on
0 Posts
Surely the diffs will be different also? They certainly are in an Impreza, and a Forester is an Impreza with a different body... The final drive ratios in the similar differentials will need changing too.
Simon
Simon
Thread
Thread Starter
Forum
Replies
Last Post