Sidelights - Help please.
#1
Sidelights - Help please.
Hello
One of the sidelights on my classic is not working First thing is replace the bulb obviously.... but, how do you get to the damn thing to change it?
Can someone explain how you get access to the bulb please....
Thanks in advance.
Slarts
One of the sidelights on my classic is not working First thing is replace the bulb obviously.... but, how do you get to the damn thing to change it?
Can someone explain how you get access to the bulb please....
Thanks in advance.
Slarts
#2
Scooby Regular
Join Date: Jul 2004
Location: St Albans
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Changing the sidelight
Hi mate
1) Open the bonnet and undo the screw ontop of the sidelight itself.
2) The whole sidelight should pull forward and out. Be careful doing this though as you have to be careful not to snap the plastic. Apply gentle force to pull it forwards and it should pop out.
3) Pull the plug out of the back of the light and that should give you access to the bulb.
4) Refitting is the reverse, make sure the light pops back in properly and then refasten the screw.
If you need help it does actually show you how to do it in the owners manual
cheers
Ash
1) Open the bonnet and undo the screw ontop of the sidelight itself.
2) The whole sidelight should pull forward and out. Be careful doing this though as you have to be careful not to snap the plastic. Apply gentle force to pull it forwards and it should pop out.
3) Pull the plug out of the back of the light and that should give you access to the bulb.
4) Refitting is the reverse, make sure the light pops back in properly and then refasten the screw.
If you need help it does actually show you how to do it in the owners manual
cheers
Ash
#3
Ah, the owners manual. It's not a patch on Scoobynet.
I got as far as removing the screw but it doesn't seem to want to budge. However, not being sure I was doing the right thing I didn't apply too much force. Now I know that I'm doing it correctly I'll get little more 'persuasive' on its ***.
Thanks for the heads up.
Rob
I got as far as removing the screw but it doesn't seem to want to budge. However, not being sure I was doing the right thing I didn't apply too much force. Now I know that I'm doing it correctly I'll get little more 'persuasive' on its ***.
Thanks for the heads up.
Rob
Thread
Thread Starter
Forum
Replies
Last Post