VTA Dump Valve fitting on MY98
#1
VTA Dump Valve fitting on MY98
Has anyone got pics/instructions for fitting a VTA dump valve on a 1998 UK turbo? I have a bailey to go on but am not sure which pipe it goes onand which gets blocked off, HELP !!!!!
#3
Scooby Regular
Join Date: Oct 2004
Location: ST HELENS
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Very easy 10 min job fitted one today bottom hose gets blocked off with samco hose and blanking plug supplied, the hose that came of the bottom now gets used on top instead and other end fits on to the bailey dv. supplied thin hose goes where the other thin hose came from on inlet manifold and other end on bailey dv sounds complicated but not just look for the top and bottom connections thats the simplest way to describe the job
Originally Posted by mitch p1
i could also do with a bit of help my mate wants to fit ine to his wrx
#5
Former Sponsor
iTrader: (72)
there should be 2 pipes on the passenger side of the intercooler which join into the standard re circ dv remove the pipes then remove the old dv, block off the bit where the bottom pipe was connected and mount the new woooosher where the top pipe was, for a better effect i got a longer samco and routed the dv up towards the n/s vent . hope this helps a bit
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM