Greddy Temp Guage
08 September 2004, 08:52 PM
#1
Scooby Regular
Thread Starter
Join Date: Jun 2004
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Greddy Temp Gauge
I have one of these in MY94 WRX, it always flashes the warning LED and the guage needle never moves...
I am not sure if it is set up correctly hence the warning, does anyone have a manual for this??!
Thanks
Cheers for the spell check.... :S
I am not sure if it is set up correctly hence the warning, does anyone have a manual for this??!
Thanks
Cheers for the spell check.... :S
Last edited by tronlc; 08 September 2004 at 09:06 PM.
10 September 2004, 07:40 AM
#4
Scooby Regular
Join Date: Jul 2004
Location: Stockholm/Sweden
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
The only thing You do when installing the Electronical temp gauge is to fit the probe. Then connects it to the meter. You can´t calibrate it.
I is the 60 mm gauge You have?
I have manuals of the Electronical Turbo meter and Exhaust temp meter.
You can also send Greddy a email about Your problem
The thread should be moved to Technical
I is the 60 mm gauge You have?
I have manuals of the Electronical Turbo meter and Exhaust temp meter.
You can also send Greddy a email about Your problem
The thread should be moved to Technical
Last edited by Swede-STI; 10 September 2004 at 07:44 AM.
11 September 2004, 11:29 PM
#5
Scooby Regular
Thread Starter
Join Date: Jun 2004
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply, how do I move it to the technical section?
I have the 60mm Electronic guages, I have an afermarket oil cooling system fitted with a remote oil filter attachemnt, connected to this is a "probe" of some sort and 2 wires, would this be it? or is that a standard fitment (the probe and wire part), I am not sure what the guage is suposed to monitor, exhause, oil etc.
Cheers
I have the 60mm Electronic guages, I have an afermarket oil cooling system fitted with a remote oil filter attachemnt, connected to this is a "probe" of some sort and 2 wires, would this be it? or is that a standard fitment (the probe and wire part), I am not sure what the guage is suposed to monitor, exhause, oil etc.
Cheers
Originally Posted by Swede-STI
The only thing You do when installing the Electronical temp gauge is to fit the probe. Then connects it to the meter. You can´t calibrate it.
I is the 60 mm gauge You have?
I have manuals of the Electronical Turbo meter and Exhaust temp meter.
You can also send Greddy a email about Your problem
The thread should be moved to Technical
I is the 60 mm gauge You have?
I have manuals of the Electronical Turbo meter and Exhaust temp meter.
You can also send Greddy a email about Your problem
The thread should be moved to Technical
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM
