Tow bars
29 June 2004, 12:26 PM
#1
Scooby Regular
Thread Starter
Join Date: Apr 1999
Posts: 974
Likes: 0
Received 0 Likes
on
0 Posts
Tow bars
I'm looking to get a removable tow bar for taking a bike to track days - i.e. only occasional use with a light weight single bike trailer.
Any recommendations for the most inconspicuous type when removed. Pictures would help.
This is for a MY00. Thanks for any help.
Any recommendations for the most inconspicuous type when removed. Pictures would help.
This is for a MY00. Thanks for any help.
29 June 2004, 07:37 PM
#3
Scooby Regular
Thread Starter
Join Date: Apr 1999
Posts: 974
Likes: 0
Received 0 Likes
on
0 Posts
Any others?
Adam, how much metalwork is visible with the bar removed?
I saw one a while back that just had a small rectangle of steel with four bolt holes visible underneath the bumber. Any ideas on which one this might be?
Adam, how much metalwork is visible with the bar removed?
I saw one a while back that just had a small rectangle of steel with four bolt holes visible underneath the bumber. Any ideas on which one this might be?
29 June 2004, 07:45 PM
#4
Mine is a '98 UK car, and has a Witter on it.
With towBALL removed (two bolts) there is a small rectangle of steel with two bolt-holes.
Even that can be removed (4 bolts) to leave just the electrics visible.
It was £150 FITTED!
it really isn't worth paying about £300 to get one that allows you to take the towball off without spanner, is it?
Alcazar
With towBALL removed (two bolts) there is a small rectangle of steel with two bolt-holes.
Even that can be removed (4 bolts) to leave just the electrics visible.
It was £150 FITTED!
it really isn't worth paying about £300 to get one that allows you to take the towball off without spanner, is it?
Alcazar
29 June 2004, 08:12 PM
#5
Originally Posted by SimonD
Any others?
Adam, how much metalwork is visible with the bar removed?
I saw one a while back that just had a small rectangle of steel with four bolt holes visible underneath the bumber. Any ideas on which one this might be?
Adam, how much metalwork is visible with the bar removed?
I saw one a while back that just had a small rectangle of steel with four bolt holes visible underneath the bumber. Any ideas on which one this might be?
plastic rectangular cap. ... pays your money and takes your
choice.
29 June 2004, 08:30 PM
#6
Scooby Regular
Join Date: Dec 2002
Location: Faster than a quickshift.... get yourself a bionic arm ;)
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
Mine has a Witter.
It has been removed with the 4 bolts underneath the back of the car.
You can just about see the position where it attatches underneath , and the single electric's.
It has been removed with the 4 bolts underneath the back of the car.
You can just about see the position where it attatches underneath , and the single electric's.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM