Sump Bung?
#1
Sump Bung?
Hi,
Can someone explain what a sump bung is and how it is fitted?
Only asking as I am going to fit an oil temp gauge and was going to drill the sump and fit an adaptor, wanted to know if the sunp bung is an easier option.
Cheers,
Jess
Can someone explain what a sump bung is and how it is fitted?
Only asking as I am going to fit an oil temp gauge and was going to drill the sump and fit an adaptor, wanted to know if the sunp bung is an easier option.
Cheers,
Jess
#2
It's basically a bolt with a threaded hole through the centre of it to accept a sender unit. ie. it allows you to fit a sender into a bolt hole which is of a different size/thread to the hole.
Scoobymania sell a sender bung. Apparantly they are not selling the sump bung type any more, but instead are selling a bung that locates in the block nr piston 3.
Scoobymania sell a sender bung. Apparantly they are not selling the sump bung type any more, but instead are selling a bung that locates in the block nr piston 3.
#4
Yes, but you are better off (I think..) using a point behind the intercooler, as this means you don't have to mess around with the sender everytime you do an oil change.
See
http://www.scoobymods.com/forums/sho...=&threadid=360
thanks,
Chris
See
http://www.scoobymods.com/forums/sho...=&threadid=360
thanks,
Chris
#7
Am I right in thinking that I can use the existing oil pressure point for my oil pressure sender Unit (using extension pipe) and then use the point under the intercooler for the oil temp sender?
Cheers,
Ian
Cheers,
Ian
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM