Can anyone help out fitting some gauges..??
#1
Can anyone help out fitting some gauges..??
Guys,
Anyone in the Berkshire area (or near to) know how to fit autometer gauges?
I need to fit: Boost gauge, Air/Fuel Ratio and electrical Oil Pressure.
Being honest, i havent a clue how to do this and am hopng someone could help...
Deano
Anyone in the Berkshire area (or near to) know how to fit autometer gauges?
I need to fit: Boost gauge, Air/Fuel Ratio and electrical Oil Pressure.
Being honest, i havent a clue how to do this and am hopng someone could help...
Deano
#3
hope chiark does not mind me linking to his site
http://www.chiark.com/scooby/gauges.asp
not sure if the afr is on. there you need + - and signal(three wire gauge) you the need the o2 sensor wire. on a my99 it is the blue plug pin 21 looking from the front third row down third wire in colour white silver. not sure on other models (did my afr yesterday)
http://www.chiark.com/scooby/gauges.asp
not sure if the afr is on. there you need + - and signal(three wire gauge) you the need the o2 sensor wire. on a my99 it is the blue plug pin 21 looking from the front third row down third wire in colour white silver. not sure on other models (did my afr yesterday)
Last edited by donutman; 14 February 2004 at 08:13 PM. Reason: to make what i wrote make sense (i hope)
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM