***Help Indicator Broken***
#1
Scooby Regular
Thread Starter
Join Date: Nov 2002
Location: Talk to the hand....
Posts: 13,331
Likes: 0
Received 0 Likes
on
0 Posts
Some **** has broken my front NS indicator mounting bracket so it's half hanging off [img]images/smilies/mad.gif[/img] I can get home by holding it in place with BluTack but how do you remove the units so I can glue it back together?
Classic shape BTW.
Thanks in advance....
UB
Classic shape BTW.
Thanks in advance....
UB
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
On the early bumper there is a cross head screw between the indicator and the fog light iirc..
Not sure on the newer one.. think yours is 99 though?
JGM
Not sure on the newer one.. think yours is 99 though?
JGM
#3
Scooby Regular
iTrader: (2)
Remove the outer lower bolt which also holds the foglight in place, and then indicator will come away, as it's just hooked in at the rear outer edge.
Mine got done too ages ago, and ran for the next year (until I put clear smoked ones on) with the bracket repaired with superglue, reinforced with Araldite.
Alcazar
Mine got done too ages ago, and ran for the next year (until I put clear smoked ones on) with the bracket repaired with superglue, reinforced with Araldite.
Alcazar
#5
Scooby Regular
Thread Starter
Join Date: Nov 2002
Location: Talk to the hand....
Posts: 13,331
Likes: 0
Received 0 Likes
on
0 Posts
OK, cheers. I found that plumber's plastic adhesive bonds the type of polythene/plastic material they are made from amazingly well.
UB
UB
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM