A flaps question
#1
I have just ordered a set of mud flaps from Scott Lowe and I have a couple of questions:-
1. What is the logo, I assume it is the STi logo??
2. Do they come with a fixing kit?
3. Are they easy to fit, any tips etc?
thanks Andy
1. What is the logo, I assume it is the STi logo??
2. Do they come with a fixing kit?
3. Are they easy to fit, any tips etc?
thanks Andy
#2
Scooby Regular
iTrader: (4)
Join Date: Sep 1999
Location: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Posts: 11,468
Received 22 Likes
on
19 Posts
1) yes and no, depends on the Type of Sticker (STi, Stars or Subaru) and colour you ordered
2)Yes the do, and full instructions, if in doubt what goes where, ask
3) Take the wheels off one at a time grease bolts and nuts. special care with the nuts in plasctic holders, dirt or slightly crossed or will **** them.
Tony
2)Yes the do, and full instructions, if in doubt what goes where, ask
3) Take the wheels off one at a time grease bolts and nuts. special care with the nuts in plasctic holders, dirt or slightly crossed or will **** them.
Tony
#5
#6
Scooby Regular
Made from highest grade polyurethane, using the latest in manufacturing technology
£2.50 worth of plastic, a couple of bolts and lots of stupid people with more money than sense to take advantage of. It used to be cruel to mock the afflicted. LOL
#7
Scooby Regular
iTrader: (4)
Join Date: Sep 1999
Location: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Posts: 11,468
Received 22 Likes
on
19 Posts
Andy,
Sorry, In a hurry when posted, at work I didn't realise you could order online, I ordered my set via E-mail 12 months ago and asked for whhich ever required
Ask if not clear which Metal/Plastic spire clips go on front and Rear, I have the memory of a goldfish so can't I remember
Fairly easy to fit but IIRC the fronts can be fiddly to get bolts, holes and clips lined up. Some thin, stiffish wire might help. I hadn't left enough time to do job and get to pick daughter up from School ;( more haste less speed
But they certainly look the Dogs
Sorry, In a hurry when posted, at work I didn't realise you could order online, I ordered my set via E-mail 12 months ago and asked for whhich ever required
Ask if not clear which Metal/Plastic spire clips go on front and Rear, I have the memory of a goldfish so can't I remember
Fairly easy to fit but IIRC the fronts can be fiddly to get bolts, holes and clips lined up. Some thin, stiffish wire might help. I hadn't left enough time to do job and get to pick daughter up from School ;( more haste less speed
But they certainly look the Dogs
Trending Topics
#8
If I wanted to attempt to buy my own plastic, cut out random shapes, and drill holes in it and finally draw some logo's on it in tipex then I would however....
Firstly, I really don't need to as I have a day job.
Secondly, £150 divided by four equals £37.50 per corner which for such a low volume product is quite a reasonable price.
Thirdly, if I can buy something like this off a supporter of this BB then I will as its my way of supporting something I get considerable value from.
Forthly, **** off
only kidding, my money, my choice
Firstly, I really don't need to as I have a day job.
Secondly, £150 divided by four equals £37.50 per corner which for such a low volume product is quite a reasonable price.
Thirdly, if I can buy something like this off a supporter of this BB then I will as its my way of supporting something I get considerable value from.
Forthly, **** off
only kidding, my money, my choice
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM