- - - - Injectors Group Buy - - - -
19 November 2003, 03:15 PM
#1
Scooby Regular
Thread Starter
Join Date: Jun 2003
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Hi All 
Put your name down on this thread to take part in a group buy for Injectors.
I've contacted a couple of suppliers and the best prices are as follows :
Blitz 550cc for phase one and two : £250
Blitz 850cc for phase one and phase two : £280
(93-00 Classic Models only)
All injectors will need a fitting kit from Pavlo at pavlo@cdtech.co.uk
He may be busy though so give hime time to answer
The price is for 4 and includes delivery by Royal Mail Next Day
I could possibly arrange a group buy for "brand new" injectors but the prices are almost double the prices listed above.
We need a minimum of 5 orders to allow the group buy to go ahead.
Cheers
Windows
Put your name down on this thread to take part in a group buy for Injectors.
I've contacted a couple of suppliers and the best prices are as follows :
Blitz 550cc for phase one and two : £250
Blitz 850cc for phase one and phase two : £280
(93-00 Classic Models only)
All injectors will need a fitting kit from Pavlo at pavlo@cdtech.co.uk
He may be busy though so give hime time to answer
The price is for 4 and includes delivery by Royal Mail Next Day
I could possibly arrange a group buy for "brand new" injectors but the prices are almost double the prices listed above.
We need a minimum of 5 orders to allow the group buy to go ahead.
Cheers
Windows
19 November 2003, 04:31 PM
#6
Scooby Regular
Join Date: Aug 2000
Posts: 2,581
Likes: 0
Received 0 Likes
on
0 Posts
how much is the fitting kit ?
can you over inject a phase one engine ?
my simple brain says get the 850 injectors & that way they wont be working as hard, can someone confirm ?
cheers
can you over inject a phase one engine ?
my simple brain says get the 850 injectors & that way they wont be working as hard, can someone confirm ?
cheers
19 November 2003, 04:37 PM
#7
Scooby Regular
Thread Starter
Join Date: Jun 2003
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Barge the 550's are good for over 400bhp.
I would only consider 850's for for anything above that?
Fitting kits are between £30 and £60 from Pavlo depending on your fuel rails m8
I would only consider 850's for for anything above that?
Fitting kits are between £30 and £60 from Pavlo depending on your fuel rails m8
Trending Topics
19 November 2003, 05:43 PM
#10
Well, that's fine, except I might not have any adaptors. If I had known about this before hand, before I placed an order for some parts on friday, things could have been better.
Also, I would suggest you find a price for the SR20 style injectors, which are phase2 drop in replacements, and still fitable to the phase 1 rails with some adaptors. Seeing as they only need one end sorting that's less money to spend on adaptors.
The other thing is 850s are too big for realistic operation on a 2.0 engine, and for those pushing 500hp 740s are much better.
Paul
Also, I would suggest you find a price for the SR20 style injectors, which are phase2 drop in replacements, and still fitable to the phase 1 rails with some adaptors. Seeing as they only need one end sorting that's less money to spend on adaptors.
The other thing is 850s are too big for realistic operation on a 2.0 engine, and for those pushing 500hp 740s are much better.
Paul
19 November 2003, 08:39 PM
#11
Scooby Regular
Thread Starter
Join Date: Jun 2003
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Sorry about that lads, I "should" have contacted Pavlo before to check!!!!
I have spoke to Pavlo tonight though and he will supply us with the adaptors for this group buy (Thanks Paul)
CataIunya they will come with a full service report
So far
NotoriousREV
CataIunya
I have spoke to Pavlo tonight though and he will supply us with the adaptors for this group buy
(Thanks Paul)CataIunya they will come with a full service report
So far
NotoriousREV
CataIunya
19 November 2003, 09:26 PM
#13
Ok Windows you C you may have cornered me into another group buy, stick me in as a provisional for 550's on MY99.
Anybody know any lucrative street corners!!!
Edited again to say, is that 550@ 2.5bar? or 3.0bar?? or other???
[Edited by RB5_245 - 11/19/2003 9:26:39 PM]
[Edited by RB5_245 - 11/19/2003 9:28:24 PM]
you may have cornered me into another group buy, stick me in as a provisional for 550's on MY99.Anybody know any lucrative street corners!!!
Edited again to say, is that 550@ 2.5bar? or 3.0bar?? or other???
[Edited by RB5_245 - 11/19/2003 9:26:39 PM]
[Edited by RB5_245 - 11/19/2003 9:28:24 PM]
19 November 2003, 10:17 PM
#14
Okay,
I've been in contact with Scot, and with the numbers involved there isn't a problem with getting stock of adaptors ahead of time (for once I will be ready).
If you're on the group buy, this is what I need to know:
Your name, address, year of car, and what injectors you want to put in it, eg 550s or 850s.
You will need to know the following.
550s into phase 1 rails = £62 inc postage
550s into phase 2 rails = £32 inc postage
850s into phase 1 rails = £62 inc postage
550s into phase 2 rails = £32 inc postage
The adaptor kits allow easy fitting, but you will have to make a subtle mod to the injectors, which is a 30 second job per injector. Phase 1 rails will also need the small rubber bung in the retainer cap cutting in half with a sharp knife (tip thanks to Pat).
I would like to get an idea of numbers of each config before I send out any parts, as there is a myriad of options for me getting stuff made.
For anyone that is waiting for an adaptor kit from me, I should be posting ALL remaining kits tomorrow (woo bloody hoo!).
Cheers
Paul
I've been in contact with Scot, and with the numbers involved there isn't a problem with getting stock of adaptors ahead of time (for once I will be ready).
If you're on the group buy, this is what I need to know:
Your name, address, year of car, and what injectors you want to put in it, eg 550s or 850s.
You will need to know the following.
550s into phase 1 rails = £62 inc postage
550s into phase 2 rails = £32 inc postage
850s into phase 1 rails = £62 inc postage
550s into phase 2 rails = £32 inc postage
The adaptor kits allow easy fitting, but you will have to make a subtle mod to the injectors, which is a 30 second job per injector. Phase 1 rails will also need the small rubber bung in the retainer cap cutting in half with a sharp knife (tip thanks to Pat).
I would like to get an idea of numbers of each config before I send out any parts, as there is a myriad of options for me getting stuff made.
For anyone that is waiting for an adaptor kit from me, I should be posting ALL remaining kits tomorrow (woo bloody hoo!).
Cheers
Paul
20 November 2003, 10:17 AM
#18
850s do seem to be okay on a 2.33 and larger. They do work on a 2.0 but the idle quality is reduced, and 740s seem fine. Partly because the 740s use a different injector technology and seem to have better atomisation.
Paul
Paul
20 November 2003, 10:25 AM
#19
Scooby Regular
Join Date: Aug 2003
Location: west yorkshire
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
I'm a complete newby to power mods..
can someone please tell me
when n why i would need higher grade injectors?
How do i tell what rail and injectors i already have?
Mines a MY98 Sti VF22 turbo.. a dodgy induction kit full decat uprated springs other than that it seems standard but may have different ecu injectors etc but i havnt a clue asto how i would check.. any advice is much appreciated
Franko
can someone please tell me
when n why i would need higher grade injectors?
How do i tell what rail and injectors i already have?
Mines a MY98 Sti VF22 turbo.. a dodgy induction kit full decat uprated springs other than that it seems standard but may have different ecu injectors etc but i havnt a clue asto how i would check.. any advice is much appreciated
Franko
20 November 2003, 12:10 PM
#20
Scooby Regular
Thread Starter
Join Date: Jun 2003
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Franko,
You should have phase one rails and 440's?
440's start to max out at just over 300bhp, but can be pushed a bit further if you up the fuel pressure with an uprated pump and FPR.
550's are are better option at this point as they can easily cope with more if/when you decide you want more power
TD05/06 owners apply hear!!
You should have phase one rails and 440's?
440's start to max out at just over 300bhp, but can be pushed a bit further if you up the fuel pressure with an uprated pump and FPR.
550's are are better option at this point as they can easily cope with more if/when you decide you want more power
TD05/06 owners apply hear!!
