please help!
28 September 2003, 10:34 PM
#1
Scooby Newbie
Thread Starter
Join Date: Sep 2003
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I have a '93 WRX and need to find out which one of the three pipes leading from the manifold (left hand side) I need to cut in order to complete the fitment of a boost guage!!!! Everything is plumed in and ready to go exept for this bloody 'T' piece.
cheers
cheers
28 September 2003, 10:38 PM
#2
Scooby Regular
Join Date: Jun 2001
Location: Manchester 360 Gamertag: WHM Odyssey
Posts: 4,015
Likes: 0
Received 0 Likes
on
0 Posts
oooh iv fitted one of these before but it was a while back mate, cant remember off hand.
if you could put up a pic id be able to point it out for you
if you could put up a pic id be able to point it out for you
28 September 2003, 11:27 PM
#5
Scooby Newbie
Thread Starter
Join Date: Sep 2003
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
http://www.msnusers.com/i1iknq1nmq7qogpf9jh049tv12/Documents/Pictures/Boost%20Gauge.JPG
Hi there. Here is a link to the pic you need... Lefthand pipe goes to re-circ value...
Hope someone can help....
Hi there. Here is a link to the pic you need... Lefthand pipe goes to re-circ value...
Hope someone can help....
Trending Topics
28 September 2003, 11:52 PM
#8
Scooby Newbie
Thread Starter
Join Date: Sep 2003
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Excellent!!! Thanks for that John, I've been waiting since last night to find out what pipe needs splicing. Correct me if I'm wrong.....that middle pipe connects to a smaller bore metal one at the back of the manifold? Don't where it goes after that!
cheers
Geraint.
cheers
Geraint.
28 September 2003, 11:56 PM
#9
Scooby Regular
Make sure you get a good t-piece - preferably one with a metal insert to strengthen it.
I had a plastic one that split, causing the car to run like a bag of s41t
I had a plastic one that split, causing the car to run like a bag of s41t
28 September 2003, 11:58 PM
#10
Scooby Regular
Join Date: Apr 2002
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
WRX240 I am at work at the moment ( no camera )
On the manifold coming off away from you are three rubber pipes close together , larger one on the Left as you look in the bonnet
Cut the centre one , put a Tee piece in line and Tee off to your Guage __avoiding the heat from the turbo on the way
Good luck John
PS took the light connection off the cigarette lighter
[Edited by whatsisname - 9/29/2003 12:00:43 AM]
[Edited by whatsisname - 9/29/2003 12:05:04 AM]
On the manifold coming off away from you are three rubber pipes close together , larger one on the Left as you look in the bonnet
Cut the centre one , put a Tee piece in line and Tee off to your Guage __avoiding the heat from the turbo on the way
Good luck John
PS took the light connection off the cigarette lighter
[Edited by whatsisname - 9/29/2003 12:00:43 AM]
[Edited by whatsisname - 9/29/2003 12:05:04 AM]
29 September 2003, 12:07 AM
#11
Scooby Newbie
Thread Starter
Join Date: Sep 2003
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Again, thanks for all the help, you did exactly what I did to set up the gauge light, that way you can still use the original connector, I actually removed mine along with the ashtray so I could mount atleast three in the centre console, although saying that I'm happy just to get this one out the way! When it's connected I'll send in a pic.
cheers all.
cheers all.