Panel alignment - is this right ?
#1
Folks, how good is the panel fit on your scoob's ? The off-side of my bonnet isn't flush with the wing, especially up near the windscreen. Is this pretty common on scoobs ?
#2
I read your thread about the front ender - you obviously are not happy and, as the customer is always right, you should take it straight back and get them to fix it how you want it to be
stop thinking about it and do it - you won't be happy until you do 'specially as you will be looking at it every time you drive it....
stop thinking about it and do it - you won't be happy until you do 'specially as you will be looking at it every time you drive it....
#3
Scooby Regular
Join Date: Jan 2000
Location: Disco, Disco!
Posts: 21,825
Likes: 0
Received 0 Likes
on
0 Posts
Mine was pretty good all arounnd - is it a new car?
May have been pranged/repaired or just want the bonnet adjuster aligned.
Look for overspray inside the bonnet, slam panel (underneath the bonnet where it latches), wings where the bonet closes, the bit covered by the bonnet, like a channel.
[Edited by Paul Habgood - 10/11/2002 10:04:40 PM]
May have been pranged/repaired or just want the bonnet adjuster aligned.
Look for overspray inside the bonnet, slam panel (underneath the bonnet where it latches), wings where the bonet closes, the bit covered by the bonnet, like a channel.
[Edited by Paul Habgood - 10/11/2002 10:04:40 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM