Easy getting to the front of a speedo.
23 September 2002, 03:09 PM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2001
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Is it fairly easy to get to the front of the dials on a 98MY (newer dash) Scooby
I need to fit some "MPH" stickers to the middle of the speedo as its been converted from kph.
There are 2 screws at the top - just undo these ?
Thanks
Rump.
I need to fit some "MPH" stickers to the middle of the speedo as its been converted from kph.
There are 2 screws at the top - just undo these ?
Thanks
Rump.
23 September 2002, 04:09 PM
#2
Undo the two screws, and gently pull away the plastic surround.
You should now see that the clear front is held in by clips top and bottom, which are self evident to remove.
Did mine to clean out a tiny pile of dust that had gone in through the trip button hole.
Alcazar
You should now see that the clear front is held in by clips top and bottom, which are self evident to remove.
Did mine to clean out a tiny pile of dust that had gone in through the trip button hole.
Alcazar
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM