Help please in fitting Samco hoses!
just like most bits on the car.
13 September 2002, 11:07 AM
#2
Scooby Regular
Join Date: Aug 2001
Location: Hampshire
Posts: 10,954
Likes: 0
Received 0 Likes
on
0 Posts
Two bolts either side of the intercooler.
Loosen off the jubilee clips on the turbo inlet and inlet manifold - wiggle
off the intercooler. Turn over - careful not to bend the fins - and undo the rest of the clips, put the samco hosing on the IC and refit back to the car.
Easy
Job done in 30 mins.
Loosen off the jubilee clips on the turbo inlet and inlet manifold - wiggle
off the intercooler. Turn over - careful not to bend the fins - and undo the rest of the clips, put the samco hosing on the IC and refit back to the car.Easy
Job done in 30 mins.
09 December 2002, 05:29 PM
#5
Scooby Regular
Join Date: Jan 2000
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Just ordered the Samco hose set for my MY00.
Is it a fairly easy job to change the three hoses in the kit? How do i remove the intercooler - and is it easy to change the Y piece??
Any advice would be greatly appreciated.
Thanks in advance,
Ray
[Edited by Spikey - 9/12/2002 5:30:14 PM]
Is it a fairly easy job to change the three hoses in the kit? How do i remove the intercooler - and is it easy to change the Y piece??
Any advice would be greatly appreciated.
Thanks in advance,
Ray
[Edited by Spikey - 9/12/2002 5:30:14 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM