STI 7 PPP now on Subaru Website
10 September 2002, 11:14 PM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2000
Posts: 1,606
Likes: 0
Received 0 Likes
on
0 Posts
Listed under accessories.
Nice graph for increases in bhp/torque :-
Shame its too small to read properly.
Looks like 300/300 roughly ?
Russ
[Edited by russell hayward - 9/10/2002 11:15:49 PM]
Nice graph for increases in bhp/torque :-
Shame its too small to read properly.
Looks like 300/300 roughly ?
Russ
[Edited by russell hayward - 9/10/2002 11:15:49 PM]
10 September 2002, 11:16 PM
#2
Scooby Regular
Join Date: Jul 2001
Posts: 21,865
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
11 September 2002, 10:53 AM
#8
Scooby Regular
Join Date: Jan 2002
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
Just being cynical, perhaps the whole "near 20 complete sets" from the other thread and the fact my dealer said they already had seven orders down for them makes me think I won't be seeing one for a while. Not that I've bothered putting my name down as I'd like to what I'll get before I order (and see whether it's worth the inevitable insurance increase).
11 September 2002, 12:04 PM
#10
Scooby Regular
Join Date: Apr 2002
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Humm, this is far from a good graph. I can sort of guess the BHP & Tourgue units but the rev. units make no sense at all either it tops out at 11,000 or 5,500. Un-modded its supposed to be 265 BHP @ 6,500 - can any one offer an explanation of the rev. scale or ordinate of this graph??
11 September 2002, 03:22 PM
#12
I would say the figures are:
Left axis - bhp - 0, 50, 100, 150, 200, 250 and 300 points
Right axis - Nm - 0, 50, 100, 150, 200, 250, 300, 350 and 400 points
[1 lb ft = 1.35 Nm roughly??!)
So, 400 Nm = 296 lb ft [roughly]
I would also estimate that the revs go from 2000 rpm to 7000 rpm with increments of 500 rpm.
Obviously the lines are:
Black - standard Sti bhp
Pink? - Sti with PPP bhp
Blue - standard Sti torque
Yellow - Sti with PPP torque
My head hurts now so I'm going to go and sit in a dark room somewhere.
Hope this helps anybody who actually gives a flying ****...!
Left axis - bhp - 0, 50, 100, 150, 200, 250 and 300 points
Right axis - Nm - 0, 50, 100, 150, 200, 250, 300, 350 and 400 points
[1 lb ft = 1.35 Nm roughly??!)
So, 400 Nm = 296 lb ft [roughly]
I would also estimate that the revs go from 2000 rpm to 7000 rpm with increments of 500 rpm.
Obviously the lines are:
Black - standard Sti bhp
Pink? - Sti with PPP bhp
Blue - standard Sti torque
Yellow - Sti with PPP torque
My head hurts now so I'm going to go and sit in a dark room somewhere.
Hope this helps anybody who actually gives a flying ****...!
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Danny0608
Subaru Parts
0
12 September 2015 02:59 PM