Matt Churchill

Guys, got my new stickers to go down the door of the scoob. They're pre cut into strips of around 8, but when I have the top of the strip in line with the top of the door, the bottom is out and vice versa.

Stupid question I know, but does anyone know if the door top and bottom are parallel or not - or I am just mad!!

Ta
Matt

GUNNER

Matt,
Recently I also added door stickers, and like you found the top and bottom are not parallel.I followed the bottom line,first of all
I measured in from door edge's and placed masking tape to give a perfect straight line to follow,also placed tape in vertical position to give starting point.once your happy with this trim your sticker edge's square to suit the tape.this system worked for me with no F**K UP'S,dead chuffed with results.

Hope this helps


MIKE

Matt Churchill

Cheers for that Mike, just finished them after 3 hours. I opted to go from the top, but also lined up the bottom, and angled a couple slightly so you can't tell they're not straight.

Will have to wait for the morning to see if it has worked, as I've been finishing in the garage.
Matt

Ray_li

What door stickers are these? piccies please

Ray

Matt Churchill

Ray, keep an eye on the members gallery - I'll post some pics tomorrow